by admin | Nov 29, 2022 | error codes
SE Code: 16.51:01 – Curing system: pressure not reachable. Printer is limiting working pressure. Problem description: Silent SE. Customer symptoms are: slower through put, and/or lack of curing printer limiting working pressure. It might be due to: target pressure too... by admin | Nov 29, 2022 | error codes
SE Code: 16.50:10 – Severe SE: Pressure calibration failure together with NVM values = 0 (failure at first startup). Problem description: Pressure calibration failure. Corrective action: ▲ Check the tube (not kinked), and sensor cable. If they are OK, replace the... by admin | Nov 29, 2022 | error codes
SE Code: 16.50:03 – Curing system: pressure calibration error. Problem description: Silent SE: If there’s already a valid pressure calibration in NVM, and new calibration values are out of range, then FW will use the NVM values and show a silent SE in the... by admin | Nov 29, 2022 | error codes
SE Code: 16.44:10 – Curing system: module 4 failure. Problem description: ENWW Continuable and non-continuable error codes 99. Corrective action: ▲ Restart the printer.▲ Replace module 4. If this doesn’t solve the problem call or email one of our service... by admin | Nov 29, 2022 | error codes
SE Code: 16.43:10 – Curing system: module 1 failure. Problem description: Curing resistor 3 disconnected or damaged. Corrective action: ▲ Restart the printer.▲ Replace module 3. If this doesn’t solve the problem call or email one of our service engineers:... by admin | Nov 29, 2022 | error codes
SE Code: 16.42:10 – Curing system: module 1 failure. Problem description: Curing resistor 2 disconnected or damaged. Corrective action: ▲ Restart the printer.▲ Replace module 2. If this doesn’t solve the problem call or email one of our service engineers:...